MemCor™ Systems
Systems that set the bar
Efficient by design, established in the field, and backed by end-to-end support
MemCor™ systems are engineered to address the demands of drinking water treatment, advanced municipal wastewater treatment, and wastewater reuse.
MemCor™ systems are proven membrane solutions and system designs that support resilient infrastructure, future-ready planning, and sustainable water stewardship across the full spectrum of drinking water and wastewater treatment.
MemCor™ MBR systems selected for three major wastewater treatment plant expansions in England
Florida’s largest Membrane Bioreactor plant celebrates expansion with DuPont™ MemPulse™ modules
Ultrafiltration for Municipal Wastewater Reuse Learn about UF and MBR systems for municipal wastewater reuseMembrane Filtration for Municipal Wastewater Nutrient Removal Explore UF and MBR systems solutions for nutrient removalMemCor™ Membrane Bioreactor (MBR) Systems
MemCor™ MBR systems – Efficient, Effective, Established
MemCor™ MBR systems have established a reputation for high efficiency, reliability, and reduced operational costs. Designed with operators in mind, it is now used in hundreds of municipal and industrial installations worldwide to convert secondary wastewater into high-quality effluent.
MemCor™ MBR systems combine unique large bubble pulsed aeration with MemPulse™ MBR modules to provide excellent effluent quality at lower aeration energy compared to other MBR systems. Based on modules with 100% PVDF hollow fibers with 0.4 µm pore size, the system delivers stable performance, operational flexibility, and low OpEx—resulting in significant cost savings throughout the life of the product.
Learn moreMemCor™ Ultrafiltration (UF) Systems
Engineered in Collaboration
For over 40 years, MemCor™ UF systems have delivered optimized, purpose-built solutions designed to fit your operations. Available in pressurized and submerged configurations, MemCor™ UF systems are designed to be flexible, efficient, and easy to install & operate.
For municipal water and wastewater plants that need consistent treatment for potable uses, reuse or discharge, Memcor™ UF systems offer cost-effective and efficient filtration of suspended solids, phosphorus, and pathogens, enabling reliable wastewater treatment with high water recovery and controlled footprint. For municipal drinking water facilities, these UF systems remove pathogens from drinking water and serve as effective pre-treatment for reverse osmosis (RO) systems.
Unlike other pressurized ultrafiltration solutions, MemCor™ UF systems provide custom-designed designs for cost-effective performance over the plant’s lifetime thanks to long lasting fiber integrity, hydraulically efficient module construction, and fit-for-purpose process and engineering designs based on extensive drinking water and wastewater application knowledge.
MemCor™ submerged ultrafiltration modules Learn about PVDF compact submerged UF systems MemCor™ pressurized ultrafiltration modules Learn about PVDF pre-assembled compact pressurized UF systemsMemPulse™ membrane bioreactor modules Learn about MBR modules
System configurations
MemCor™ systems can be designed in a variety of configurations to balance end-users’ unique needs for their facilities. Our team works with engineering firms, owners, and owners’ engineers to determine the configuration that best fits the end-user’s goals. MemCor™ MBR System Configurations MemCor™ UF System Configurations
Single Rack: Classic design that saves on tanks
- Cost-effective system design for small systems or wide tanks (4 - 16 modules/rack).
- Suitable for open tank concept & mobile units.
- Easy maintenance & replacement.
Dual Rack: Optimized savings on tanks and more
- Simpler rack design with fewer manifolds/pipes to the main header than single racks/small cassettes for both capital cost savings and easier maintenance.
- Low cost of labor & installation engineering.
- Suitable for open tank concept & mobile units.
- Easy maintenance & replacement.
Hanging Dual Rack: Best of both worlds using MemPulse™ MBR module racks with cassette-based tank layouts
- Fewer manifolds/pipes to main header (lower cost) vs. Single Rack/Small Cassettes.
- Suitable for conventional tank designs that use covers and grating.
- Easy maintenance & replacement.
Adaptive Module Series (AM) for cassette system retrofit: Maximize your production and reduce energy
- MemPulse™ MBR module based solutions for upgrades and retrofits.
- Access to low energy aeration technology & process control that features low chemical usage.
- Maximize your system availability with less fouling and downtime by upgrading to the latest MBR membranes and aeration technology.
- Easy maintenance & replacement.
PVDF compact pressurized CPII systems
The MemCor™ CPII ultrafiltration system is a pressurized, pre-engineered, and pre-assembled system with a modular building block configuration and ultra-compact footprint. CPII racks are ideal for new installations and upgrades of existing facilities.
Pressurized MemCor™ L40N v2 & MemCor™ L40N R2 ultrafiltration modules
- 68 m2 (MemCor™ L40N v2 module) & 67 m2 (MemCor ™L40N module) filtration area.
- 7” (D) x 70” (H) size.
- 0.04 μm pore size in a proven PVDF fiber with high mechanical and abrasion resistance capable of 15+ years in operation.
- MemCor™ L40N R2 grade available for applications that need virus rejection beyond the typical standard.
Fully assembled CPII racks with
- Molded nylon rack headers.
- ABS module housing center tube.
- Mechanical fittings & accessories.
- Painted, mild steel support skids.
Features
- Up to 36 MemCor™ L40N modules per rack skid.
- Self-supporting, self-manifolded for rapid installation.
- Multiple configurations to fit a specific site.
- Top and side module access point for ease of maintenance.
- Standard seismic design.
- Up to 5.0 bar operational pressure.
- Most compact design for large scale projects.
PVDF compact submerged (CSII) systems
MemCor™ CSII is a submerged ultrafiltration system that features “double ended” filtration, high solids handling capability, low energy use and a compact footprint. MemCor™ CSII ultrafiltration systems are ideal for new installations or upgrades to existing filter systems or clarifiers.
- MemCor™ L20N v2 & L20N Modules.
- 42 m2 & 35 m2 filtration area.
- 4.7” (D) x 70” (H) size.
- 0.04 μm pore size in a proven PVDF fiber with high mechanical and abrasion resistance capable of 15+ years in operation.
Pre-engineered CSII racks (nylon or stainless steel) and in-tank rack support hardware
- Molded nylon or stainless steel rack headers.
- Perspex module aeration sleeve.
- Mechanical fittings & accessories.
- Stainless steel frames and brackets.
Features
- Up to 44 modules per rack.
- Scalable building blocks.
- High solids handling capacity.
- Single step direct coupling to reverse osmosis.
- Low total cost of ownership.
- Low energy consumption.
- Most compact footprint.
-
MemCor™ MBR System Configurations +
Single Rack: Classic design that saves on tanks
- Cost-effective system design for small systems or wide tanks (4 - 16 modules/rack).
- Suitable for open tank concept & mobile units.
- Easy maintenance & replacement.
Dual Rack: Optimized savings on tanks and more
- Simpler rack design with fewer manifolds/pipes to the main header than single racks/small cassettes for both capital cost savings and easier maintenance.
- Low cost of labor & installation engineering.
- Suitable for open tank concept & mobile units.
- Easy maintenance & replacement.
Hanging Dual Rack: Best of both worlds using MemPulse™ MBR module racks with cassette-based tank layouts
- Fewer manifolds/pipes to main header (lower cost) vs. Single Rack/Small Cassettes.
- Suitable for conventional tank designs that use covers and grating.
- Easy maintenance & replacement.
Adaptive Module Series (AM) for cassette system retrofit: Maximize your production and reduce energy
- MemPulse™ MBR module based solutions for upgrades and retrofits.
- Access to low energy aeration technology & process control that features low chemical usage.
- Maximize your system availability with less fouling and downtime by upgrading to the latest MBR membranes and aeration technology.
- Easy maintenance & replacement.
-
MemCor™ UF System Configurations +
PVDF compact pressurized CPII systems
The MemCor™ CPII ultrafiltration system is a pressurized, pre-engineered, and pre-assembled system with a modular building block configuration and ultra-compact footprint. CPII racks are ideal for new installations and upgrades of existing facilities.
Pressurized MemCor™ L40N v2 & MemCor™ L40N R2 ultrafiltration modules
- 68 m2 (MemCor™ L40N v2 module) & 67 m2 (MemCor ™L40N module) filtration area.
- 7” (D) x 70” (H) size.
- 0.04 μm pore size in a proven PVDF fiber with high mechanical and abrasion resistance capable of 15+ years in operation.
- MemCor™ L40N R2 grade available for applications that need virus rejection beyond the typical standard.
Fully assembled CPII racks with
- Molded nylon rack headers.
- ABS module housing center tube.
- Mechanical fittings & accessories.
- Painted, mild steel support skids.
Features
- Up to 36 MemCor™ L40N modules per rack skid.
- Self-supporting, self-manifolded for rapid installation.
- Multiple configurations to fit a specific site.
- Top and side module access point for ease of maintenance.
- Standard seismic design.
- Up to 5.0 bar operational pressure.
- Most compact design for large scale projects.
PVDF compact submerged (CSII) systems
MemCor™ CSII is a submerged ultrafiltration system that features “double ended” filtration, high solids handling capability, low energy use and a compact footprint. MemCor™ CSII ultrafiltration systems are ideal for new installations or upgrades to existing filter systems or clarifiers.
- MemCor™ L20N v2 & L20N Modules.
- 42 m2 & 35 m2 filtration area.
- 4.7” (D) x 70” (H) size.
- 0.04 μm pore size in a proven PVDF fiber with high mechanical and abrasion resistance capable of 15+ years in operation.
Pre-engineered CSII racks (nylon or stainless steel) and in-tank rack support hardware
- Molded nylon or stainless steel rack headers.
- Perspex module aeration sleeve.
- Mechanical fittings & accessories.
- Stainless steel frames and brackets.
Features
- Up to 44 modules per rack.
- Scalable building blocks.
- High solids handling capacity.
- Single step direct coupling to reverse osmosis.
- Low total cost of ownership.
- Low energy consumption.
- Most compact footprint.
-
+
Related industries
Our technologies provide premium solutions for a broad range of applications, industries, and markets.
We help ensure a steady flow of clean, safe drinking water into local communities with our water-treatment solutions.
Learn more
Each day, we help feed the world through farm-to-table processing solutions focused on healthier foods and protein-based diets.
We provide high-quality and durable solutions to the seawater reverse osmosis (SWRO) system to last the lifecycle of operations.
We enable a reliable supply of ultrapure water with multi-tech solutions to maximize wastewater recovery and minimize liquid discharge.
Learn more
We develop best-in-class technologies, accompanied by an advanced product portfolio of solutions, to address your crucial wastewater challenges.
Wastewater Reuse
Our industrial wastewater treatment technologies can help treat high chemical oxygen demand (COD), total organic carbon (TOC), total suspended solids (TSS), and total dissolved solids (TDS).
Minimal Liquid Discharge
Our minimal liquid discharge integrated technologies can provide improved cost savings, recovery, and environmental stewardship than traditional ZLD processes.
Learn moreFor MemCor™ related inquiries, please contact:
MemCor™ General Inquiries
See what’s possible
Ask how we can help your industry or market with our MemCor™ systems portfolio