DuPont™ Tile Bond™ Roof Tile Adhesive
One-Component, Minimal-Expanding Foam for Clay and Concrete Roof Tiles
DuPont™ Tile Bond™ Roof Tile Adhesive
One-Component, Minimal-Expanding Foam for Clay and Concrete Roof Tiles
<br><b>DuPont™ Tile Bond™ Roof Tile Adhesive</b> is a portable one-component polyurethane foam adhesive for attaching concrete and clay roof tiles. Available in either a self-contained handheld aerosol can or a large canister, it is quicker and easier to install compared to traditional attachment methods such as screws, mortar, wire ties and clips. Minimal expanding <b>Tile Bond™</b> also provides greater attachment strength while minimizing nail penetrations and reducing roof weight loads. <br><br> <b>Tile Bond™</b>is designed for use with low/flat, medium, high and two-piece barrel profiles of roof tile when applied to a preapproved underlayment. With its easy-to-use dispensing equipment, <b>Tile Bond™ </b>can be quickly and efficiently dispensed in a highly consistent manner, eliminating the need for expensive equipment and ratio monitoring. It is an excellent choice for all new, reroof and specialty applications, including hip and ridge, rake and valley, and field and eave installations.
Resources
Product Information Sheets Installation Guides Brochure Safety Data Sheets
Features & Benefits
Ease of Use & Compliance
- No off-ratio concerns, capital or equipment necessary, no extra clean up or maintenance or external power source required.
- Texas DOI, Miami-Dade County, and Florida Building Code approved.
- Hurricane-zone qualified.
Performance & Efficiency
- Restartability – cylinder can be easily shut off, stored, and restarted numerous times to ensure full use of product.
- Highest yield in both field and hip/ridge applications – up to 350 field tiles per 23 lb. large canister.
- Lowest cost per installed tile among single component adhesives.
- Moisture-cured – can be used on wet substrates.
- Proven to not lift tiles.
- Improved efficiency – have multiple installers working at once.
Specifications
Standard Sizes
Testing
<b>DuPont™ Tile Bond™ Roof Tile Adhesive </b> exhibits physical properties as indicated in the table below when tested as represented. Review all instructions and (Material) Safety Data Sheet ((M)SDS) before use. Please contact DuPont at 1-866-583-2583 when additional guidance is required for writing specifications that include this product.
concrete to concrete
1Vertical compressive strength is measured at 10% deformation or at yield, whichever occurs first.
2Based on 1” thickness.
Code Compliance
<b>DuPont™ Tile Bond™ Roof Tile Adhesive</b> complies with the following codes: