DuPont™ Styrofoam™ Brand Cavitymate™ Plus XPS Insulation
Durable, Moisture-Resistant, Cavity Wall Insulation<br>U.S. HFC Regulation Compliant Formulation
DuPont™ Styrofoam™ Brand Cavitymate™ Plus XPS Insulation
Durable, Moisture-Resistant, Cavity Wall Insulation<br>U.S. HFC Regulation Compliant Formulation
<br><b>DuPont™ Styrofoam™ Brand Cavitymate™ Plus Extruded Polystyrene (XPS) Insulation</b> is a moisture-resistant, durable and lightweight extruded polystyrene foam board specifically designed for use in wet cavity wall environments in commercial applications. Sized to fit snugly between wall ties, it is easy to handle, cut and install, saving time and money on the job site. <br><br>The closed-cell structure of <b>Styrofoam™ Brand Cavitymate™ Plus XPS Insulation</b> boards helps ensure exceptional long-term thermal performance and high moisture resistance.
Resources
Product Information Sheets Installation Guides Guide Specifications Technical Documents Brochure Codes & Certifications Fire Performance Warranty
Features & Benefits
Convenient Size
- Easy to fit between brick ties.
- Meets all wet cavity needs.
Lightweight and Durable
- Easy to handle, cut and install.
- Helps save time and money on site.
Specifications
Standard Sizes
Note: Please be advised that additional sizes may be available. Availability of all sizes varies by region and is subject to change. For further information, please contact your local DuPont Sales Representative or call us at 1-866-338-7668.
Testing
<b>Styrofoam™ Brand Cavitymate™ Plus XPS Insulation</b> exhibits the properties and characteristics indicated in the table below when tested as represented. Review all instructions and (Material) Safety Data Sheet ((M)SDS) before use. Please contact DuPont at 1-833-338-7668 when additional guidance is required for writing specifications that include this product.
Smoke Developed ≤ 450
•h•°F/Btu, R-value, min.
in/in•°F
1Values are consistent with the criteria of ASTM C578 and the requirements of the FTC R-value rule (16 CFR Part 460). R means resistance to heat flow. The higher the R-value, the greater the insulating power.
2Vertical compressive strength is measured at 10 percent deformation or at yield, whichever occurs first. Since Styrofoam™ Brand Extruded Polystyrene Foam Insulations are visco-elastic materials, adequate design safety factors should be used to prevent long-term creep and fatigue deformation.
3Based on 1” thickness.
Code Compliance
<b>Styrofoam™ Brand Cavitymate™ Plus XPS Insulation</b> complies with the following codes: