DuPont™ Styrofoam™ Brand Ag Board XPS Insulation
U.S. HFC Regulation Compliant Formulation
DuPont™ Styrofoam™ Brand Ag Board XPS Insulation
U.S. HFC Regulation Compliant Formulation
<br /><b>DuPont™ Styrofoam™ Brand Ag Board Extruded Polystyrene (XPS) Insulation</b> is durable XPS foam board that resists moisture infiltration, withstands high-pressure cleaning and reduces the potential for moisture condensation within the wall. <p> In addition to its exceptional insulating value, <b>Styrofoam™ Brand Ag Board XPS Insulation</b> resists moisture infiltration, withstands high-pressure cleaning and reduces the potential for moisture condensation within the wall. The easy-to-install <b>Styrofoam™ Brand Ag Board XPS Insulation</b> uses shiplapped edges to create a secure joint that does not require taping, saving considerable installation time.</p>
Resources
Product Information Sheets Installation Guides Technical Documents Codes & Certifications Warranty
Features & Benefits
Ease of Installation
- Lightweight and easy to install.
- Shiplapped edges creating a secure joint that does not require taping.
- Saves on installation time.
Moisture Resistant
- Superior resistance to water absorption, water vapor transmission, and freeze thaw cycling.
Specifications
Standard Sizes
Note: Please be advised that additional sizes may be available. Availability of all sizes varies by region and is subject to change. For further information, please contact your local DuPont Sales Representative or call us at 1-866-338-7668.
Testing
<b>Styrofoam™ Brand Ag Board XPS Insulation</b> exhibits the properties and characteristics indicated in the table below when tested as represented. Review all instructions and (Material) Safety Data Sheet ((M)SDS) before use. Please contact DuPont at 1-833-338-7668 when additional guidance is required for writing specifications that include this product.
Smoke Developed ≤ 450
•h•°F/Btu, R-value, min.
in/in•°F
1Values are consistent with the criteria of ASTM C578 and the requirements of the FTC R-value rule (16 CFR Part 460). R means resistance to heat flow. The higher the R-value, the greater the insulating power.
2Vertical compressive strength is measured at 10 percent deformation or at yield, whichever occurs first. Since Styrofoam™ Brand Extruded Polystyrene Foam Insulations are visco-elastic materials, adequate design safety factors should be used to prevent long-term creep and fatigue deformation.
3Based on 1” thickness.
Code Compliance
<b>Styrofoam™ Brand Ag Board XPS Insulation</b> complies with the following codes: